Heliport FATO&Aiming Point Light is used for night operation.
FATO white inset perimeter light mounting at FATO perimeters to offer FATO area illumination while Aiming Point Lights should be provided at a heliport where it is necessary for a pilot to make an approach to a particular point before proceeding to the TLOF.
Normally used at the heliports which are located in environments with obstacles interfering and limiting the approach area, such as trees or buildings.
Aiming Point Light shall be inset mounted when a light extending above the surface could endanger helicopter operations.
Custom solutions is available like operation voltage, color yellow, blue, red.
Function Applications
· Flush mounted FATO edge lights by ICAO standards.
· Aiming point lights
· Flight path alignment lights
· Approach lights
Heliport Applications
· Surface-level ground heliport
· Rooftop&Elevated heliport
· Shipyard&Shipboard
Compliance
- ICAO Annex 14, Volume II, 4th Edition, July, 2013
- FAA AC150/5390-2C
Features
• Casting aluminum alloy strong body.
• Rating IP68.
• 2 ways cable out from bottom/side easy for cable connection for optional.
• Polycarbonate lens very good impact resistance.
• Light source using high power LED with an expectancy lifespan 100,000 hours.
• Built in surge protection device, can be used in the harsh environment.
Application
• Heliports
• Surface Heliports
• Elevated Heliports
• Offshore
• Airfield Lighting
Data Sheet